Products
PD Fast charge Lightning Cable Pink Color
Made with original Chip, type C to Lightning cables full support with OS versions and all future updates. They adopt the latest and faster charging C94 lightning terminal design,and built-in overvoltage protection ensure your iPhone/iPad devices are charged safely, at their fastest possible speed.
Features
Following a review of the cable's appearance, length, and terminal test, a disassembly session will begin so that everyone may see how this iphone 14 pro lightning cable was constructed internally by Apple.
First, make a cut in the Lightning terminal's plastic casing so that a fixed steel sleeve can be spot welded underneath.
A steel sleeve with a spot weld wrap around it protects the interior. One end is filled with sealant, and the other end is put together with a plastic ring.
To provide grounding, shielding, and fixing work, the steel sleeve ties the cable at the end.
Disassemble the cable's rear steel jacket harness before moving on.
Remove the two-piece spot-welded fixed steel sleeve that was secured and protected the Lightning terminal by being spot-welded to it.
The Lightning terminal is soldered after the cable tail has been molded, fastened, and secured as a complete.
The internal integration of the PD fast charging protocol identification, the encryption module, as well as the product serial number, manufacturer, and other information.
The front of the little board has a huge chip model AS3616A.
Adhesive protection is fixed to the solder joint's back side.
Under the adhesive, there is a CSP-packaged chip as well.
After making the initial cut to separate the shell from the USB-C terminal, the interior steel sleeve was spot-welded.
USB-C male connector assembly plastic ring filling.
The steel sleeve is a two-piece structure that is spot welded into place on both the USB-C male connector and the steel sleeve itself, creating an extremely sturdy connection.
The internal injection allows the wire end bushing to be formed in one piece.
The end of the cable is likewise fixed by an injection molding technique and soldered to the USB-C terminal after the spot-soldered fixed steel jacket is removed.
The steel sleeve and USB-C male connector are fused together quite tightly.
Solder the positive wire, CC wire, USB 2.0 data wire, and negative bare wire core to the tiny board side of the USB-C connector.
On the back of the terminal block, there are two filter capacitors soldered in place.
Remove the USB-C male connector's metal casing.
The internal plastic positioning bracket in closeup.
The male connector is a non-full pin design, where the two pins near the outer negative terminal are lengthened and connected to the charger's internal terminal for grounding, a proprietary design for Apple C to L cables and chargers.
Slice the data line and look at the cross-section. Five cores with insulating skin are visible; the positive power core has two red cores, the inner core is thicker, the CC core has a blue thin line in the middle, the USB 2.0 core has white and green, and the negative power core in the outer area is bare wire core.
Underneath the shielding mesh is a layer of shielding aluminum foil.
Remove the shielding aluminum foil to reveal the data and power cores inside, together with the tensile wire. All cores have a spinning winding structure, which can help to reduce stress and increase the flexibility of the cable.
The following will begin by providing an overview of the internal cores of the cable before going into more detail.
The two red positive power wire cores are comprised of internal anti-pull wire-free pure copper wire.
White D-core data cable for USB 2.0; the internal anti-pull wire was not present.
Green for D+ core data cable for USB 2.0; no internal anti-pull wire
The negative wire core is shown up close with four parallel tinned copper wires.
USB-C to lightning cables support power delivery fast charge for iPhone 14/ 14 plus /14 Pro /14 Pro Max/13/13Pro/13ProMax/13Mini/12/12Pro/12ProMax/12Mini/11/11Pro/11Pro MAX/XS/XS MAX/XR/X/8/8Plus/iPad 8/Pro (10.5-inch)/Pro (12.9-inch) 1st generation/Pro (12.9-inch) 2nd generation(Note:You need to use 20W or above USB-C Power Adapter to achieve fast charge).
Goowell Electronics Certifications
Hot Tags: PD Fast charge Lightning Cable Pink Color, China PD Fast charge Lightning Cable Pink Color manufacturers, factory, usb port car charger, Customized Apple MFi Certified Data Cable, harness assembly, Customized Apple Original Data Cable, fiber optic connector types, high quality audio video cables
You Might Also Like
Send Inquiry
