JST 1 25mm Cable

JST 1 25mm cable, JST Angle Connectors, 1.25MM 2-Pin/ 3-Pin Male/Female Connector Plug with Wires Cables, 20-Pack (3 Pin)

Tin-coated copper wire can help get rid of heat more quickly.

Most circuit boards use this JST right angle female male connector plug wire.

The wire's insulation is not easy to peel off, so it is safe.

The wire core is made of tinned copper wire, which is very good at conducting electricity.

You can connect many circuit boards with a set of 20 JST connect wires.

Description of the Product for this JST 1.25mm Cable:

This JST right angle female male connector plug wire is mostly used for circuit boards.

The wire core is made of tinned copper wire, which is very good at conducting electricity.

Tin-coated copper wire can help get rid of heat faster.

The wire's insulation is not easy to peel off, which makes sure it is safe.

20 pieces per set of JST 1 25mm cable or connect wires, you can connect a lot of circuit boards. Specifications:

Red and black (2 pins), red and black and yellow (3 pins)

Type: 2 pins, 3 pins (Optional)

The wire core is made of tin-plated copper and there are 7 of them.

PVC is used for the sheath.

Length of cable: 100mm

Wire maximum Outer diameter: 0.01 (mm)

Cross-section size: 0.1mm2

80°C is the set temperature. Package Included:

20 JST Connector Plugs JST 1.25mm Cable

What are the exact measurements of the connection, like 3mm wide by 2mm tall, etc.?

Answer: The top edge has a "shoulder" and a "connector block." The block is 4.8mm wide x 2.77mm deep x 3.6mm high. The shoulder is 5.51mm wide x 3.2mm deep x 0.6mm high. These are Molex Picoblade connectors series 51021. JST makes a 1.25mm pitch connector but theirs has a locking clip on it. You should be able to download a dimensional drawing from the web.

Is this good enough for a 12v 1amp power supply connector?

Answer: I would disagree I think. These wires are pretty thin. From what I can tell, these wires are probably about 36 gauge.

34 gauge wire, which is slightly bigger, can only handle 0.3 amps. Fair enough, this wire is stranded and covered, but I'd use something a bit thicker for an amp.

Hot Tags: jst 1 25mm cable, China jst 1 25mm cable manufacturers, factory, UAV Cable, Customized UAV Cable