Products

Home Products Radio Control Models Connecting Wire Radio Control Models Plug Details

EC2 Plug

Electric soldering iron, there are 40/60/80/100/120/150W electric soldering irons on the market, we recommend 60-100W for EC2, and 100-150W electric soldering iron for EC3 and EC5.

Send Inquiry

Features

【Introduction】

This series of EC2 Plugs are widely used in the RC industry for the high power supply of Lipo battery packs. R/C model enthusiasts can use them to make their own power cables for high current resistance wires.

【Product Description】

The EC series connector utilizes a standard 2.0, 3.5, or 5.0 mm banana-head bullet connector, which is wrapped in a plastic protective cover and is divided into positive and negative poles.

You only need to solder the banana header connectors to the ends of the wires, and then snap them into the plastic housing.

The connectors of the EC series are divided into male and female shells, connecting equipment (from left to right, EC2, EC3, EC5)

image001(002)

(EC2 Plug)Female end male connector, connect the battery (from left to right, EC2, EC3, EC5)

image007(002)

【Specifications】

Category	EC2	EC3	EC5
Size	20136mm	25mm x 17mm x 8mm	34mm x 20mm x 10mm
Weight	6 Gram	10 Gram	14 Gram
Rated Current	25A Approx 20-16AWG Silicone Wire	40A Approx 16-12AWG Silicone Wire	80A Approx 12-8AWG Silicone Wire
Pin Type	2PIN Banana Bullets 2.0MM	2PIN Banana Bullets 3.5MM	2PIN Banana Bullets 5.0MM
Support Cells of Lipo	2S 3S Cells Lipo	3S 4S 5S Cells Lipo	6S, 7S & 8S Cells Lipo Compatible with 2x 3S & 4S Cells Lipo
Same Current Rated Terminal Type	EC2,IC2 & XT30	EC5, IC3 & XT60	EC3, IC5 & XT90

【Instructions for use】

Video Link：https://www.youtube.com/watch?v=vYpJI1zJXOo

Tool:

1. Electric soldering iron, there are 40/60/80/100/120/150W electric soldering irons on the market, we recommend 60-100W for EC2, and 100-150W electric soldering iron for EC3 and EC5.

2. Solder Silk Thickness 1.0mm

3. Pliers

4. Wire stripper

5.1.5 mm hex screwdriver

6. Flat-blade screwdriver and

7.EC2/EC3/EC5 connector

【Advantage】

1. EFLIGHT is a very well-designed connector, which solves many shortcomings of Deans connectors.

2. Both the male and female housings are completely shielded, and it is easy to arrange the housings in a row for connection, and the connection is very firm.

3. Soldering the banana head is quite simple and does not require heat shrinkage, but care must be taken not to leave the solder in the shell to ensure proper fit with the shell.

【Shortcoming】

It is more expensive than the T plug, and it is more difficult to separate the wire and the terminal because they are very tightly connected.

Product Package and Shipment:

Note: Package: normally 100pcs-500pcs in a polybag, depending on the product size, then put into carton box.

Shipment normally by air or express.

_01(001)