Test To See How Well Terminal Wires Work

Analysis of the Test to See How Well Terminal Wires Work

If there are more than two wires connected to a terminal wire, choose the wire with the biggest cross-sectional area to measure the tension. During the final inspection, the wire harness is mostly checked for size and how well it conducts electricity. This is so that you can use a tape measure to see if each branch of the wire harness is the right size. The drawings say that, unless the wiring harness is very simple, the continuity test must be done with an electronic wire tester.

This terminal wire tester is a testing tool with a microcomputer and a testing program that has already been set. Before testing, you have to type in the number and name of the testing wire harness. Enter the number and name of the wiring harness so that the wiring harness can be connected to the jacks that go with it. After the job is done, the most important thing is to make sure the circuit works. The computer can show unqualified and invalid terminal wire products, such as faults (wrong wiring) so that the people doing the testing can fix them.

Inspection is a very important step in making sure that terminal wires can be used safely. This is also the first thing the company needs from its products in terms of quality. Because of this, you have to be careful to make sure of the quality of the terminal wires. As the home industry continues to grow, it has become much more professional to identify terminal lines. There has been a professional computer system for identifying people, mostly based on computer simulations and the idea that the rules are set by the programmed program. The wire harness is looked at, and the standard terminal wires that are needed are picked out.

After merging based on the category, the length and classification can be done automatically. In this way, there is a new way to tell which line is the terminal line. The traditional way of figuring out diagrams by doing math and the way of adding and summing has been greatly improved. This has a big impact on the production power of my country's electromechanical industry, reduces the number of mistakes that people make when they work, and directly benefits the enterprise. A key part of the circuit is the control signal on the terminal line. If it is short, the circuit won't work.