Can Fast Charging Data Cable Be Used With Ordinary Charging Head?

Can you use a rapid charging data cord with a regular charging head?

Fast-charging data cables can be utilized with regular charging heads.

In general, the charging head plays a bigger part in how quickly the phone charges, but the data line also has a significant impact.

Normal data cables have 5 cores, but fast-charging cables typically have 7 cores.

In comparison, the original 7-core data connection charges faster than the typical 5-core data line.

Therefore, there usually isn't a problem when using a regular charging head for fast charging or flash charging. However, using a regular data cable and a rapid charging/flash charging head may result in a reduction in charging speed, etc.

Use the original charging head and cable, if possible.

Fast charging's fundamental tenet is that power equals voltage times current. You must raise the charging voltage and current in order to accelerate charging.

A high charging current equates to rapid charging speed, and vice versa.

Increasing the voltage or the current are the two methods now available to achieve quick charging.

By accelerating battery aging and posing a safety risk, increasing the charging voltage produces a lot of heat.

In contrast, it is more dependable to use low voltage and high current.

Fast charging cables and how they differ from regular cables Fast charging cables differ from standard cables in that they operate on a different concept, charge more quickly, have a different charging interface, have thicker wires, can handle more power, and are made of different materials. several principles The goal of fast charging is to achieve high-power charging by increasing the charging current and voltage.

In order to restore the active material in the battery, the common principle of the wire is to allow DC power to pass in the opposite direction of discharge. various charging rates Fast charging cables are high-power DC chargers that can charge a battery to 80% of its capacity in 30 minutes.

The typical cord is for AC charging, which takes six to eight hours to complete. Interfaces for Charging Variations The rapid charging cable has three different USB interfaces: USB-A, USB-C, and USB-C. Fast charging is already supported by almost all smart devices and is the current charging interface.

The cable's standard interface is a USB port that can be used with a standard USB charging head.

The cable's thickness varies. cable for quick charging because fast charging data line with fast charging head charging, the current via the fast charging data line than ordinary data line, therefore the fast charging data line needs to be supplied with a better core, shield, line sheath, etc..

The wire diameter is greater and thicker than that of regular data cables. Because the data line current and normal wire charging power are both minimal, the wire itself is rather thin.