Knowledge

The traditional wire harness welding processes mainly include: fusion welding, fiber welding, and pressure welding. 1) Fusion welding is a method in which the workpiece interface i

Study the working characteristics of the wiring harness. The key problem is to solve the state probability distribution of the harness. The basic mathematical model of the wiring h

The quality of the wire harness material directly affects the quality of the wire harness, and the selection of the wire harness material is related to the quality and service life

According to different structures, it is divided into full utilization harness, partial utilization harness and link system; according to different service methods, it is divided i

The first station of wire harness production is the open-wire process. The accuracy of the wire-opening process is directly related to the entire production schedule. Once an error

In modern cars, the electronic control system is closely related to the wiring harness. Someone once made a vivid analogy: the microcomputer is equivalent to the human brain, the s

The material requirements for automotive wiring harnesses are also very strict: Including its electrical properties, material emission, temperature resistance, etc., are higher tha

The standard of the wire harness is mainly calculated by calculating its crimping rate. The calculation of the crimping rate requires special instruments. The wire harness cross-se

1) Detection and judgment of wire harness burnout fault In the circuit of the power supply system, where the ground is, the wire bundle will be burned, and the junction of the burn

Common faults in automobile lines are: poor contact of connectors, short circuit between wires, open circuit, grounding, etc. The reasons are as follows: 1) Natural damage The use

In order to facilitate installation and maintenance and ensure that the electrical equipment can work under the worst conditions, the wires of different specifications and colors u

The wiring harness (circuit group) provides the overall service equipment for a certain load source group, such as trunk lines, switching devices, control systems, etc. The basic r